Thrislington Toilet Cubicle - Oasis
Oasis is a groundbreaking floating cubicle. The intelligent placement of the foot allows the cubicle to suspended from the headrail to create what appears to be a floating cubicle. of the divider edge.
Headrail
Visible full aluminium frame. Self-closing hydraulic door closer. Stainless steel fittings.
Foot
Standard height of 2000mm with 150mm floor gap. Available in certain finishes in full height version up to 2700mm with minimal floor gap.
Lock
Machined stainless steel lock. Anti-fingertrap. Lock locates into integral receiver. Emergency release.
Hydraulic Closer
Patented Hydraulic Closer ensures that all Oasis doors will close or open beautifully, quietly and with a satisfying amount of resistance.
Glass
Toughened glass, laminated or back painted to specified level of obscurity.
Options:Smart glass, Laminated glass, Low-Iron, Float, Range of standard colours, RAL colour match on request.
Specification:Overall standard cubicle height 2000mm with 150mm floor clearance. Full height version available up to 2700mm tall with a 15mm floor gap.
Framework:Full aluminium frame. Extruded satin anodised headrail and vertical posts, with integral full height door closing buffer.
Door:10mm back painted toughened glass or 10.76mm toughened laminated glass, polished to all edges. Countersunk stainless steel pig-nose fixings to the face of the door allow attachment to stainless steel pivot blocks. Door suspended from aluminium headrail and located onto bottom pivot bracket, falls closed by means of a hydraulic closer concealed within the aluminium headrail (alternatively, the closer can be factory set to fall open).
Divider:10mm back painted toughened glass or 10.76mm toughened laminated glass, polished to all edges. Supported 150mm from the floor by an engineered 304 grade stainless steel foot, with height adjustment.
Fittings:Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Lock finger housed within the door, extends from the door edge and engages into the receiver, integral to the aluminium framework. Complete with emergency release facility and buffer. Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Stainless steel coat hook supplied as standard. Tested to 350,000 cycles.
Wood Veneer
Real wood veneer backed with composite material to enable fabrication.
Options:Matt, Silk, Engineered, Relief, Grained, Unfinished, Optional cross grain.
Specification:Overall standard cubicle height 2000mm with 150mm floor clearance. Full height version available up to 2700mm tall with a 15mm floor gap.
Framework:Full aluminium frame. Extruded satin anodised headrail and vertical posts, with integral full height door closing buffer.
Door:32mm finished thickness consisting of a 30mm composite core, edged first and faced with wood veneer. Concealed fixings within the door allow attachment to dovetail pivot block. Door suspended from aluminium headrail and located onto a bottom pivot bracket, falls closed by means of a hydraulic closer concealed within the aluminium headrail (alternatively, the closer can be factory set to fall open). Complete with anti-finger trap clearance on pivot side of door.
Divider:18mm finished thickness consisting of a 16mm moisture resistant chipboard core, lip-edged first to top and bottom edges, then faced with wood veneer. Supported 150mm from the floor by an engineered 304 grade stainless steel foot, with height adjustment.
Fittings:Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Lock finger housed within the door, extends from the door edge and engages into the receiver, integral to the aluminium framework. Complete with emergency release facility and buffer. Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Stainless steel coat hook supplied as standard.
Aluminium
Metallic sheet bonded to MDF core, double folded on vertical edges.
Options:Brushed stainless steel, Patterned stainless steel, Satin anodised aluminium, Powder coated aluminium.
Specification:Overall standard cubicle height 2000mm with 150mm floor clearance. Full height version available up to 2700mm tall with a 15mm floor gap.
Framework:Full aluminium frame. Extruded satin anodised headrail and vertical posts, with integral full height door closing buffer.
Door:32mm finished thickness consisting of a 30mm composite core, edged top and bottom in matching high pressure laminate, then faced both sides with stainless steel sheet, each double folded to create vertical seam in the centre of the door edge. Concealed fixings within the door allow attachment to dovetail pivot block. Suspended from aluminium headrail and located onto a bottom pivot bracket, door falls closed by means of a hydraulic closer concealed within the aluminium headrail. Anti-finger trap clearance on pivot side of door.
Divider:18mm finished thickness consisting of a 16mm moisture resistant chipboard core, faced both sides with stainless steel sheet, each folded to create a horizontal seam in the center of the divider edge. Supported 150mm from the floor by an engineered 304 grade stainless steel foot, with height adjustment.
Fittings:Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Lock finger housed within the door, extends from the door edge and engages into the receiver, integral to the aluminum framework. Complete with emergency release facility and buffer. Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Stainless steel coat hook supplied as standard.
Stainless Steel
Metallic sheet bonded to MDF core, double folded on vertical edges.
Options:Brushed stainless steel, Patterned stainless steel, Satin anodized aluminum, Powder coated aluminum.
Specification:Overall standard cubicle height 2000mm with 150mm floor clearance. Full height version available up to 2700mm tall with a 15mm floor gap.
Framework:Full aluminum frame. Extruded satin anodized headrail and vertical posts, with integral full height door closing buffer.
Door:32mm finished thickness consisting of a 30mm composite core, edged top and bottom in matching high pressure laminate, then faced both sides with stainless steel sheet, each double folded to create vertical seam in the center of the door edge. Concealed fixings within the door allow attachment to dovetail pivot block. Suspended from aluminum headrail and located onto a bottom pivot bracket, door falls closed by means of a hydraulic closer concealed within the aluminum headrail. Anti-finger trap clearance on pivot side of door.
Divider:18mm finished thickness consisting of a 16mm moisture resistant chipboard core, faced both sides with stainless steel sheet, each folded to create a horizontal seam in the center of the divider edge. Supported 150mm from the floor by an engineered 304 grade stainless steel foot, with height adjustment.
Fittings:Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Lock finger housed within the door, extends from the door edge and engages into the receiver, integral to the aluminum framework. Complete with emergency release facility and buffer. Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Stainless steel coat hook supplied as standard.
Compact Grade Laminate
Multiple layers of resinimpregnated high quality kraft papers.
Options:Compact Grade Laminate, High Pressure Laminate, Extensive range of colors, Wide range of suppliers, Color match on request, Wood grains, Digital prints.
Specification:Overall standard cubicle height 2000mm with 150mm floor clearance. Full height version available up to 2700mm tall with a 15mm floor gap.
Framework:Full aluminium frame. Extruded satin anodised headrail and vertical posts, with integral full height door closing buffer.
Door:12mm compact grade laminate, polished to all edges. Stainless steel fixings to the face of the door allow attachment to stainless steel pivot blocks. Door suspended from aluminum headrail and located onto bottom pivot bracket, falls closed by means of a hydraulic closer concealed within the aluminum headrail (alternatively, the closer can be factory set to fall open).
Divider:12mm compact grade laminate, polished to visible edges. Supported 150mm from the floor by an engineered 304 grade stainless steel foot, with height adjustment.
Fittings:Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Lock finger housed within the door, extends from the door edge and engages into the receiver, integral to the aluminum framework. Complete with emergency release facility and buffer. Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Stainless steel coat hook supplied as standard.
High Pressure Laminate
Multiple layers of high quality resin laminate.
Options:High Pressure Laminate, Extensive range of colors, Wide range of suppliers, Color match on request, Wood grains, Digital prints.
Specification:Overall standard cubicle height 2000mm with 150mm floor clearance. Full height version available up to 2700mm tall with a 15mm floor gap.
Framework:Full aluminum frame. Extruded satin anodized headrail and vertical posts, with integral full height door closing buffer.
Door:12mm compact grade laminate, polished to all edges. Stainless steel fixings to the face of the door allow attachment to stainless steel pivot blocks. Door suspended from aluminum headrail and located onto bottom pivot bracket, falls closed by means of a hydraulic closer concealed within the aluminum headrail (alternatively, the closer can be factory set to fall open).
Divider:12mm compact grade laminate, polished to visible edges. Supported 150mm from the floor by an engineered 304 grade stainless steel foot, with height adjustment.
Fittings:Engineered 303 grade brushed stainless steel lock, fixed through the door to the face plate for added strength. Lock finger housed within the door, extends from the door edge and engages into the receiver, integral to the aluminum framework. Complete with emergency release facility and buffer. Divider fixed to back wall using concealed steel brackets, fastened by through-fixings. Stainless steel coat hook supplied as standard.
Discover more commercial bathroom cubicles from Thrislington Cubicles